Arduino on

Retro Lamp goes HypnoOrb

Thu, 03 Dec 2009 09:40:17 +0000

Candice saved this hideous old lamp from a bulldozer (literally) and for the last year and a bit we’ve had it hanging up in our basement for extra ambient lighting. The light was setup only to be turned off/on by pulling/placing the plug and that part’s so sketch that we rarely use the thing. So when it came time to replace a bulb, I decided to use a HypnoOrb instead of a more typical bulb. ** **

MakerBot Plastruder Crash

Tue, 27 Oct 2009 10:40:41 +0000

While trying to print something on my MakerBot last night, I had an awesome fail where the heater barrel of the plastruder was ripped out. Upon continued reflection, I think this was the product of how I had the heater barrel interfaced with the insulator barrel and I think I know how to fix it without replacing parts. Check out the video below:

World, meet my first home-made circuit board

Thu, 30 Jul 2009 07:02:04 +0000

My very first PCB

Well, with the priceless aid of my dear friend HappyThawts, I’ve managed to produce my first home-made Printed Circuit Board!

How it went

There were a bunch of weird issues that came up in making it and thus it’s not all that ideal, though I could hack it to work. The main challenge was that my copper clad boards were actually covered with PhotoResist (for masking boards via UV). The process we used entailed working directly on a layer of Copper. Thankfully Happy realized that Acetone would probably send the PhotoResist on it’s merry way to aqueous exile in my trash-chemicals bucket. She was dead-on there.

HypnoOrb Prototype MK2

Fri, 16 Jan 2009 01:32:28 +0000

Arduino Independence

Tue, 13 Jan 2009 00:08:43 +0000

Getting the Arduino Processor to function on a breadboard

The next step in my HypnoOrb project is to figure out how to get the Arduino microprocessor (AKA ATMega168) that makes the whole thing work function with as little hardware as possible. Thanks to this awesome site, I found, I now know what I wasn’t doing right before finding that document. I hope making a reference to that helpful tutorial here will help others find it faster than I did. Have fun!

World, meet the HypnoOrb

Wed, 03 Dec 2008 11:44:35 +0000

Using the toys I’ve been enjoying ever so much lately, I’ve managed to really nicely smooth out the programming in my Arduino for my RGB LED. It’s so awesome that I’m given it a name! Meet the HypnoOrb!

At this point I only have the raw prototype, but I’m considering going ahead an making more of them. I have to work out pricing and smooth of some aspects of the design. If you’re interested in getting one, please contact me or post a message here - the more interest I see on this thing, the faster I’ll work at finding an inexpensive means of producing them.

Goofin' Around with 7-Segment Displays & my Arduino

Tue, 02 Dec 2008 10:09:09 +0000

I’ve taken a few little steps forward towards my plans of building some cool stuff I’ve yet to announce. Yesterday I focused on testing out a tutorial I found on the Arduino website regarding driving multiple LEDs via chained shift registers. This setup is pretty cool as it only takes 3 pins off of the arduino (excluding power, which could be easily driven separately). I used the tutorial here to get the potentiometer going.