Arduino on

Cupcake155 Episode 4

Sat, 16 Jan 2016 15:52:05 +0000

Cupcake155 has been endowed with a sweet lighting system. I built it in an open way, so others can re-trace my steps without having to start from zero. It’s actually a pretty sweet system, I call it Illuminatrix.

Check out Cupcake155 episode 4 here.

Retro Lamp goes HypnoOrb

Thu, 03 Dec 2009 09:40:17 +0000

Candice saved this hideous old lamp from a bulldozer (literally) and for the last year and a bit we’ve had it hanging up in our basement for extra ambient lighting. The light was setup only to be turned off/on by pulling/placing the plug and that part’s so sketch that we rarely use the thing. So when it came time to replace a bulb, I decided to use a HypnoOrb instead of a more typical bulb. ** **

MakerBot Plastruder Modified For Slightly Enhanced Awesomeness

Mon, 26 Oct 2009 14:35:21 +0000

Hello world, so I’ve been working very hard at getting my most awesome MakerBot working. It’s been a patience invoking venture and also extremely educational. The MakerBot employs some rather brilliant little tricks that make it simple, strong and friggin cheap. It’s a great gadget to have, though it’s definitely NOT for those who want everything now and aren’t capable of taking their time to do the job correctly.

Meet My Mod

So, in trying to get my MakerBot rockin, I’ve had to debug some stuff in my assembly. The instructions given on assembly are outstanding considering how much stuff you need to do to build one. That said, they’re not flawlessly exhaustive either - and this isn’t yet an exact science. I found myself frustrated by the positioning of the circuit board (I’ll just call it a PCB for now) positioned on the thing that outputs the plastic (Plastruder/RepRap). As you can see in my included photos, I’ve moved the PCB off to the side and flipped it behind the Plastruder.

Arduino Independence

Tue, 13 Jan 2009 00:08:43 +0000

Getting the Arduino Processor to function on a breadboard

The next step in my HypnoOrb project is to figure out how to get the Arduino microprocessor (AKA ATMega168) that makes the whole thing work function with as little hardware as possible. Thanks to this awesome site, I found, I now know what I wasn’t doing right before finding that document. I hope making a reference to that helpful tutorial here will help others find it faster than I did. Have fun!

World, meet the HypnoOrb

Wed, 03 Dec 2008 11:44:35 +0000

Using the toys I’ve been enjoying ever so much lately, I’ve managed to really nicely smooth out the programming in my Arduino for my RGB LED. It’s so awesome that I’m given it a name! Meet the HypnoOrb!

At this point I only have the raw prototype, but I’m considering going ahead an making more of them. I have to work out pricing and smooth of some aspects of the design. If you’re interested in getting one, please contact me or post a message here - the more interest I see on this thing, the faster I’ll work at finding an inexpensive means of producing them.

Goofin' Around with 7-Segment Displays & my Arduino

Tue, 02 Dec 2008 10:09:09 +0000

I’ve taken a few little steps forward towards my plans of building some cool stuff I’ve yet to announce. Yesterday I focused on testing out a tutorial I found on the Arduino website regarding driving multiple LEDs via chained shift registers. This setup is pretty cool as it only takes 3 pins off of the arduino (excluding power, which could be easily driven separately). I used the tutorial here to get the potentiometer going.

Arduino/Freeduino Play

Fri, 14 Nov 2008 10:24:18 +0000

Here’s a video I decided to toss up on YouTube just showing some of the results of some of the goofing around I’ve been doing with my Arduino board (it’s actually a Freeduino).

I had a lot of trouble getting the board to work at first, but once I ran it through an ultrasonic cleaner it seemed to smooth out a lot. Though, some times it still has a hard time programming, in which case I can just apply pressure to the FTDI chip and then it’ll program. I’ve tried re-soldering the pins on the FTDI, but that didn’t entirely resolve the issue enough. Not to worry though, it consistently works perfectly enough for me.