https://dawning.ca/tags/print/Recent content in Print onHugo -- gohugo.ioenCopyright © James SnellThu, 10 Sep 2015 17:07:55 +0000https://dawning.ca/posts/cupcake-155-episode-3/Thu, 10 Sep 2015 17:07:55 +0000https://dawning.ca/posts/cupcake-155-episode-3/ <p><figure> <picture> <img loading="lazy" decoding="async" alt="" class="image_figure image_internal image_unprocessed" src="https://dawning.ca/uploads/2015/09/742px-Sdramps-300x242.jpeg" /> </picture> </figure> </p> <p><figure> <picture> <img loading="lazy" decoding="async" alt="" class="image_figure image_internal image_unprocessed" src="https://dawning.ca/uploads/2015/09/Screen-Shot-2015-09-10-at-5.40.57-PM-300x214.png" /> </picture> </figure> </p> <p>Episode #3 of my Cupcake155 project <a href="https://dawning.ca/hardware/makerbot/2015-episode-3-cupcake155-coarse-optimization/">has been posted</a>.</p> <p>The key jist being that I found on complex prints, I would typically get a few major slips in the print. There often were also places where the print delayed in a location for a time, this left scars too.</p> <p>Ultimately, a $10 SD board and a quick firmware change later and my prints were vastly improved.</p>