Reprap on

DeltaFlyer Episode II: Prime Line Rollers

Wed, 13 Apr 2016 11:14:08 +0000

DeltaFlyer Episode II was originally posted to hackaday.io. I’ve mirrored it here for my own purposes.

For the Delta Flyer’s maiden voyage, I opted to go cheap and use Prime Line rollers (referenced in an earlier log). They’re fairly inexpensive and I didn’t have much grief finding them at a couple different local stores. They definitely have slop in them, so they’re not really a good choice and probably go from rough to terrible as print speed is increased. Episode II here is to illustrate how well these actually work.

Cupcake 155 Episode 3

Thu, 10 Sep 2015 17:07:55 +0000

Episode #3 of my Cupcake155 project has been posted.

The key jist being that I found on complex prints, I would typically get a few major slips in the print. There often were also places where the print delayed in a location for a time, this left scars too.

Ultimately, a $10 SD board and a quick firmware change later and my prints were vastly improved.

Cupcake155 Episode 2

Sat, 14 Feb 2015 01:53:28 +0000

After roughly a month of effort, I’ve now got my old Cupcake heavily retro-fitted and running pretty well.

Cupcake155 Episode 2 gives the key details of how I modified my old MakerBot Cupcake in to something modern and unique. Others may find it helpful to re-trace my steps and perhaps get printing sooner!

Cupcake155 Episode 1

Wed, 04 Feb 2015 10:24:26 +0000

I’ve missed playing with 3D printing since I mothballed my printer years ago. It was shelved over major pains in getting the extruder to work properly. I also wasn’t especially fond of working with ABS plastic, which feels pretty toxic to me.

A few weeks back I decided that my old printer, while in bad shape, was still most of a 3D-printer. I had been looking at ready-made products I could potentially buy, but I wanted the satisfaction of doing most of it for myself. I knew right-off-the-bat that I’d be replacing the extruder as it seems clear to me vast progress has been made about that point.

MakerBot Plastruder Modified For Slightly Enhanced Awesomeness

Mon, 26 Oct 2009 14:35:21 +0000

Hello world, so I’ve been working very hard at getting my most awesome MakerBot working. It’s been a patience invoking venture and also extremely educational. The MakerBot employs some rather brilliant little tricks that make it simple, strong and friggin cheap. It’s a great gadget to have, though it’s definitely NOT for those who want everything now and aren’t capable of taking their time to do the job correctly.

Meet My Mod

So, in trying to get my MakerBot rockin, I’ve had to debug some stuff in my assembly. The instructions given on assembly are outstanding considering how much stuff you need to do to build one. That said, they’re not flawlessly exhaustive either - and this isn’t yet an exact science. I found myself frustrated by the positioning of the circuit board (I’ll just call it a PCB for now) positioned on the thing that outputs the plastic (Plastruder/RepRap). As you can see in my included photos, I’ve moved the PCB off to the side and flipped it behind the Plastruder.